Temperature calibration tanks are used to calibration of precision temperature sensors such as RTD’s, (LIG) Liquid in Glass Thermometer, Thermocouples & PRTs, SPRTs. Calibration tanks use electronic controllers with high accuracy and stability for a variety of measuring ranges.
With thermal cups help ensure the temperature is well transmitted between the heat block to the best possible sensors. It is recommended to correctly use thermal cups for the best effect.
SEC-LT-30125 Specifications:
- PID controller heater control between -30 and 125oC
- Power supply: 230VAC, 50Hz
- Power consumption: 1000W
- Accuracy: +/-0.5oC
Calibration bath SEC-LT-30125
- Diameter in the mouth of the furnace: 18.5mm
- Furnace Depth: 110mm
- With 4 heat cups (Adaptor pocket) with the following size:
1) ID 6.1 mm
2) ID 8.1 mm
3) ID 10.1 mm
- Total heat tank size: 150 X 300 X 280 mm
- Furnace Weight: 8.5Kgs
- When the tank is powered, the calibration heat tank will display the ambient temperature. The tank will heat between -30 and 125oC via the PID controller when the ON button is turned on (Other than the power switch)
- Stability: 0.2oC
- Accuracy: +/-0.2oC
- Cooling time from environment to 125oC: 10 to 15 minutes
- Cooling time from environment to -30oC: 10 to 15 minutes
Refer to TB-650 high range calibration bath or liquid tanks with high precision TB-250