General introduction:
- The water alarm system in the cargo compartment (also known as the water alarm system penetrates the cargo hold and the empty compartments on the nose – English name: Water ingress detection system) is one of the cargo alarm system of the BC code system – (including water alarm intrusion and dry suction of the nasal cavity).
- For dangerous cargo ships, in addition to the sensor requirements of the real system reaching ip68 protection level, the sensor must also be approved for explosion prevention and approval by the registry.
- Below is a water alarm system to penetrate the explosion-type cargo bunker of Shanghai Rongde explosion room type, specialized for use for dangerous dry cargo ships – suitable systems for coal and ore vessels …
System details:
Block diagram of the water alarm system into the cargo cellar
The system includes: Control cabinet, IP68 sensor – explosion room for 2-level alarm pressure cargo tunnel, IP68 sensor – explosion room for 1-level float-type nose drum compartment, Isolation equipment for safe and dangerous areas, Junction box IP68 – explosion room , accessories for testing the post-installation system…
Control cabinet: Share the same type with the cabinet of the usual alarm system.
Control cabinet of water alarm system penetrates the cargo tunnel
Water sensors penetrate the cargo tunnel: As a pressure sensor, it is possible to use a 2-level alarm sensor and the main alarm, minimizing wire pulling and construction work. Ip68 immersion and explosion level sensors are essentially safe (highest level)
Water alarm sensor into the explosion-style cargo bunker
Water sensor into the nasal drum compartments: As a 1-level float sensor with a protective tube, the sensor is installed in the pits on the nasal drum compartments, this sensor also reaches the level of explosion prevention is safe in nature and ip68 immersion.
Water alarm sensor enters the empty compartment on the nose of the explosion room
In addition, the system is also equipped with: Explosion isolation set (used to separate safe and dangerous areas, ensure the whole system meets explosion prevention standards), watertight connection boxes for Junction box, accessories for post-installation testing …
See parameters:
by TESIndustry
Related Post
