The MultiRAE PGM-6228 gas detector is one of the most advanced chemical detection machines on the market. With dynamic customization that selects 6 different gases simultaneously along with wireless connectivity, this multi-target air meter is versatile and has a variety of customizations, while providing real-time access to alerts and alarms from any location. Optionally 6/25 sensors including LEL, PID, NDIR, and electrolysmization can be easily changed off-field. The MultiRAE gas detector provides important information for the rapid response to incidents by 5 alarm types, including Man-down and wireless connection to your control center.
MultiRAE PGM-6228 Gas detector Features:
- Wireless integration options
- 25 alternative sensor options for a variety of fields, including PID, NDIR, and toxins such as ammonia, chlorine and formaldehyde
- Five types of near and far alarms, including Man-down
- Dustproof and Waterproof (IP65-rated)
- Sturdy design
- Gas library includes 190 VOCs and 55 flammable gases
- Longest battery life compared to machines of the same type
- Intuitive interface, easy-to-understand icons
- Flipable display
- Large buttons for easy navigation even with 3-layer gloves
- Continuous data recording – six months x 5 sensors x 24/7
- Automatic inspection and automatic correction with AutoRAE 2
MultiRAE PGM-6228 Gas detector Application:
- Laboratory
- Limited space
- Emergency – Emergency Rescue
- Environment
- Cleanup / Remediation
- probe
- Fracking
- Hazard Response
- Plant Stop/Maintenance
- Urban search and rescue
- Protect a place
STANDARD CONFIGURATION:
- MultiRAE gas detector with selected sensor, battery, wireless card if selected, sheath, filter, belt clamp
- Data recording device
- Carryable Charging/Computer Connection Cable
- Power Charger
- Calibration cap
- Alkaline Battery Installer
- 6-edge lock
- PID Sensor Opener
- 3 pieces of backup filter
- 6 inch probe
- Quick guide
- Included document CDs
- ProRAE Studio II blanket section using device configuration and data management
- Calibration Certificate
- Warranty card
- Moving suitcase (if booked)
ATTENTION WHEN ORDERING:
- NDIR percent Vol combustible sensor must be accompanied by the catalytic LEL sensor
- ClO2 and H2S sensors cannot be installed in the same instrument
- NO and NH3 sensors cannot be installed in the same instrument
SENSOR SPECIFICATIONS
| PID Sensor | Range | Resolution |
| VOC 10.6 eV (HR) | 0 to 5,000 ppm | 0.1 ppm |
| Combustible Sensors | Range | Resolution |
| Catalytic LEL | 0 to 100% LEL | 1% LEL |
| NDIR (0-100% LEL Methane) | 0 to 100% LEL | 1% LEL |
| NDIR (0-100% Vol. Methane) | 0 to 100% Vol. | 0.1% Vol. |
| Carbon Dioxide CO2 NDIR Sensor | Range | Resolution |
| CO2 NDIR HR Carbon Dioxide (CO2) NDIR Sensor | 0 to 50,000 ppm | 100 ppm |
| Electrochemical Sensors | Range | Resolution |
| Ammonia (NH3) | 0 to 100 ppm | 1 ppm |
| Carbon Monoxide (CO) | 0 to 500 ppm | 1 ppm |
| Carbon Monoxide (CO), Ext Range | 0 to 2,000 ppm | 10 ppm |
| Carbon Monoxide (CO), H2-comp. | 0 to 2,000 ppm | 10 ppm |
| Carbon Monoxide (CO) Hydrogen Sulfide (H2S) – Combo | 0 to 500 ppm 0 to 200 ppm | 1 ppm 0.1 ppm |
| Chlorine (Cl2) | 0 to 50 ppm | 0.1 ppm |
| Chlorine Dioxide (ClO2) | 0 to 1 ppm | 0.03 ppm |
| Ethylene Oxide (EtO-A) | 0 to 100 ppm | 0.5 ppm |
| Ethylene Oxide (EtO-B) | 0 to 10 ppm | 0.1 ppm |
| Formaldehyde (HCHO) | 0 to 10 ppm | 0.01 ppm |
| Hydrogen Cyanide (HCN) | 0 to 50 ppm | 0.5 ppm |
| Hydrogen Sulfide (H2S) | 0 to 100 ppm | 0.1 ppm |
| Methyl Mercaptan (CH3-SH) | 0 to 10 ppm | 0.1 ppm |
| Nitric Oxide (NO) | 0 to 250 ppm | 0.5 ppm |
| Nitrogen Dioxide (NO2) | 0 to 20 ppm | 0.1 ppm |
| Oxygen (O2) | 0 to 30% Vol. | 0.1%Vol. |
| Phosphine (PH3) | 0 to 20 ppm | 0.1 ppm |
| Sulfur Dioxide (SO2) | 0 to 20 ppm | 0.1 ppm |
Related Post
