Open box Ventis MX4 gas detection device, lel, O2, CO, H2S, NO2, SO2 gas measurement

General introduction:

• The MX4 Ventis multi-gas detection machine is designed for your safety, giving you a higher-level gas detection program. Detect one to four gases with a wide range of gas sensors and the ability to sample gases when integrated with air suction pumps at a distance of up to 30m. The machine is covered with an external cast protection layer, which has two colors: traditional black and orange with greater safety.

application:

• Compact, handheld toxic multi-gas detector, suitable for toxic gas measurement applications except for safe work, controlling the concentration of gases affecting humans
• Allows measurement of 1-4 gases with a wide measurement range
• Collect gas samples up to 100 ft away optionally with sample collection pump spare parts
• Sturdy design adapts lips except for toxic industry
• According to IP66/67 certification for control in dirty and stagnant environments
• Allow users to select and expand the necessary sensors at any time
• Convenient Lithium-Ion Rechargeable Battery Pack, in combination with extender that allows for extended battery life up to 20 hours continuously
• The device allows continuous measurement or use with time segment sample pumps for application cases for limiting control measurement intervals
• Integrated multiple languages: English, French, German
• Save the highest read value, allowing users to review the results after the signal without downloading the information about
• Machine memory enables continuous updates of measurement and retention values for a minimum of 3 months and warning signals for users to identify in conditions of high noise, low light
• The pump program allows machine inspection and warning to use if the test mode does not work
• Quick-Cal calibration mode saves time and allows the sensor to instantly calibration when used with a standard air hose

Technical parameters:

• LCD display
• LED and sound signal warning (95dB) and vibration indicator
• Gas measurement function: Fire gas/Methane, O2, CO, H2S, NO2, SO2
• Measurement range integrated with sensor:
• Polycarbonate > rubber, impact-proof and sealed equipment
• Second size: 103 x 58 x 30 mm, with Lithium-Ion Battery
• 167 x 67 x 66 mm, when used with pump, Battery
• Weight: 182 g/380g
• Conditions of use: environment -20oC… 50°C/15-95% RH, non-condensing

Some actual images of opening the gas detector box:

Key offers include:

• 01 Ventis MX4 mainmachine, 01 English manual catalog, Factory test minutes
• Calibration caps, calibration tubes, charging stations, power switches, plug types
• Attached standard accessories

See more equivalents

by TESIndustry